 |
|||
|
|
|||
|
Page Title:
SIDE MARKER AND CLEARANCE LAMPS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0124 00
SIDE MARKER CLEARANCE LAMPS REPLACEMENT (Contd)
REMOVAL
NOTE
All side marker lights and clearance lights are replaced the same.
1.
Remove two screws (11), lens frame (10), and lens (9) from marker light base (6).
2.
Remove lamp (8) from marker light base (6).
3.
Remove four nuts (3), lockwashers (4), and screws (7) from marker light base (6) and bracket (5).
Discard lockwashers (4).
4.
Disconnect wire (2) from wire (1) and remove marker light base (6) from bracket (5).
5.
Remove locknut (13), two lockwashers (14), screw (15), and bracket (5) from fender (12). Discard
lockwashers (14) and locknut (13).
INSTALLATION
1.
Install bracket (5) on fender (12) with screw (15), two new lockwashers (14), and new locknut (13).
2.
Connect wire (2) to wire (1).
3.
Install marker light base (6) on bracket (5) with four screws (7), new lockwashers (4), and nuts (3).
4.
Install lamp (8) in marker light base (6).
5.
Install lens (9) and lens frame (10) on marker light base (6) with two screws (11).
6.
Connect battery ground cable (WP 0126 00).
7.
Check operation of side marker light (TM 9-2320-361-10).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
4
3
1
2
15
5
6
14
7
9
8
10
12
13
11
END OF WORK PACKAGE
0124 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version