 |
|||
|
|
|||
|
Page Title:
HOT WATER PERSONNEL HEATER CONTROL SWITCH REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0116 00
HOT WATER PERSONNEL HEATER CONTROL SWITCH REPLACEMENT (Contd)
REMOVAL
1.
Remove nut (9), lockwasher (8), locking ring (7), and switch (11) from mounting bracket (5).
Discard lockwasher (8).
NOTE
Prior to removal, tag lead wires for installation.
2.
Remove three screw-assembled lockwashers (12) and four wires (4) from switch (6). Discard
assembled washer screws (8).
3.
Remove two nuts (2), lockwashers (1), screws (10), and mounting bracket (5) from instrument
panel (3). Discard lockwashers (1).
INSTALLATION
1.
Install mounting bracket (5) on instrument panel (3) with two screws (10), new lockwashers (1),
and nuts (2).
2.
Install four wires (4) on switch (11) with three new assembled washer screws (12).
3.
Position toggle switch in switch (11) down. Install plate (6), locking ring (7), new lockwasher (8),
and nut (9) on mounting bracket (5).
4.
Connect battery ground cable (WP 0126 00).
5.
Check heater switch for proper operation (TM 9-2320-361-10).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
3
12
5
4
4
6
7
6
11
8
12
10
9
4
END OF WORK PACKAGE
0116 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version