|
|
TM 9-2320-361-24-1
0107 00
ENGINE TEMPERATURE SENDING UNIT REPLACEMENT (Contd)
REMOVAL
NOTE
Prior to removal, tag all lead wires for installation.
1.
Disconnect wire (2) from engine temperature sending unit (3).
2.
Remove engine temperature sending unit (3) from intake manifold (1).
INSTALLATION
NOTE
Clean all male pipe threads and coat with sealing compound
before installation.
1.
Install engine temperature sending unit (3) in intake manifold (1).
2.
Connect wire (2) to engine temperature sending unit (3).
3.
Connect battery ground cable (WP 0126 00).
4.
Fill cooling system (WP 0076 00).
5.
Start engine (TM 9-2320-361-10) and check for coolant leaks at water manifold.
6.
Check coolant temperature gauge for proper operation.
7.
Lower hood and secure (TM 9-2320-361-10).
8.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
3
END OF WORK PACKAGE
0107 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |