 |
|||
|
|
|||
|
Page Title:
OIL PRESSURE SENDING UNIT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0106 00
OIL PRESSURE SENDING UNIT REPLACEMENT (Contd)
CAUTION
The 60 psi and 120 psi gauges and sending units are not
interchangeable. Do not interchange the 60 psi gauge or
sending unit with a 120 psi gauge or sending unit.
NOTE
Do not remove elbow and adapter unless items require
replacement.
REMOVAL
1.
Disconnect wire (1) from oil pressure sending unit (2).
2.
Remove oil pressure sending unit (2) from adapter fitting (3).
3.
Remove adapter fitting (3) and elbow (4) from engine (5).
INSTALLATION
NOTE
Clean all male pipe threads and wrap with antiseize tape
before installation.
1.
Install elbow (4) and adapter fitting (3) on engine (5).
2.
Install oil pressure sending unit (2) in adapter (3).
3.
Connect lead wire (1) to oil pressure sending unit (2).
4.
Install air cleaner assembly (WP 0053 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Start engine (TM 9-2320-361-10) and check for oil leaks around adapter and elbow.
7.
Check for proper operation of oil pressure gauge (TM 9-232-361-10).
8.
Lower hood and secure (TM 9-2320-361-10).
9.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0106 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version