|
|
TM 9-2320-361-24-1
0104 00
ACCESSORY POWER SWITCH REPLACEMENT (Contd)
REMOVAL
1.
Remove screw (9), lockwasher (10), and handle (8) from switch (4). Discard lockwasher (10).
2.
Remove nut (7), lockwasher (6), and switch plate (1) from switch (4). Discard lockwasher (6).
3.
Remove switch (4) from instrument panel (5).
NOTE
Prior to removal, tag lead wires for installation.
4.
Disconnect wires (11), (12), (13), and (14) from switch (4).
INSTALLATION
1.
Connect wires (11), (12), (13), and (14) to switch (4).
2.
Install switch (4) and switch plate (1) on instrument panel (5) with new lockwasher (6) and
nut (7). Position locator tab (3) in hole (2).
3.
Install handle (8) on switch (4) with new lockwasher (10) and screw (9).
4.
Connect battery ground cable (WP 0126 00).
5.
Check accessory power switch for proper operation (TM 9-2320-361-10).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
4
3
2
1
10
5
4
11
LOAD
BATTERY
PORT B
PORT C
6
12
7
GROUND
9
8
PORT A
LOAD
PORT C
13
14
END OF WORK PACKAGE
0104 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |