 |
|||
|
|
|||
|
Page Title:
TACHOMETER DRIVE SHAFT AND DRIVE CORE MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0097 00
TACHOMETER DRIVE SHAFT AND DRIVE CORE MAINTENANCE (Contd)
REMOVAL
1.
Turn four lockstuds (4) 1/4 turn left and pull instrument cluster (3) away from instrument
panel (5).
2.
Disconnect tachometer drive shaft (1) from tachometer (2).
3.
Disconnect tachometer drive shaft (1) from tachometer drive unit (18).
4.
Remove two locknuts (7), screws (13), four clamps (8), tachometer drive shaft (l), and wiring
harness (6) from two brackets (15). Discard locknuts (7).
5.
Remove locknut (22), screw (20), clamp (21), and tachometer drive shaft (1) from bracket (17).
Discard locknut (22).
6.
Remove two screws (9), washers (10), and brackets (15) from rocker arm cover (14).
7.
Remove nut (24), lockwasher (23), and bracket (17) from air compressor stud (16). Discard
lockwasher (23).
8.
Remove grommet (11) and tachometer drive shaft (1) from firewall (13).
9.
Remove four clamps (8) and clamp (21) from tachometer drive shaft (l).
INSPECTION
Inspect drive shaft drive core (19) and grommet (11). Replace if defective.
INSTALLATION
1.
Install four clamps (8) and clamp (21) on tachometer drive shaft (l).
2.
Install tachometer drive shaft (1) and grommet (11) in firewall (12).
3.
Install two brackets (15) on rocker arm cover (14) with two washers (10) and screws (9).
4.
Install bracket (17) on air compressor stud (16) with new lockwasher (21) and nut (24).
5.
Connect tachometer drive shaft (1) to tachometer drive unit (18).
6.
Connect tachometer drive shaft (1) to tachometer (2).
7.
Install tachometer drive shaft (l), clamp (21), screw (20), and new locknut (22) on bracket (17).
8.
Install tachometer drive shaft (1) and wiring harness (6) on two brackets (15) with four clamps (8),
two screws (13), and new locknuts (7).
9.
Position instrument cluster (3) on instrument panel (5) and install by turning four lockstuds (4)
1/4 turn to right.
10.
Connect battery ground cable (WP 0126 00).
11.
Lower and secure hood (TM 9-2320-361-10).
12.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0097 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version