 |
|||
|
|
|||
|
Page Title:
INSTRUMENT CLUSTER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0093 00
INSTRUMENT CLUSTER REPLACEMENT (Contd)
REMOVAL
1.
Turn four lockstuds (1) turn to left and pull instrument cluster (2) away from instrument
panel (3).
NOTE
Prior to removal, tag each lead wire, air tube, and drive shaft
for installation.
Location of gauges on instrument cluster may vary for M44A2
series trucks. Install gauges in their original locations.
2.
Disconnect tachometer drive shaft (19) from tachometer (6).
3.
Disconnect speedometer drive shaft (12) from speedometer (7).
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
4.
Disconnect air line (26) from air pressure gauge (27).
5.
Disconnect lead wire plug (16) from lead wire connector (17).
6.
Disconnect lead wire plugs (5) and (25) from engine temperature gauge (4).
7.
Disconnect lead wire plugs (10) and (11) from oil pressure gauge (9).
8.
Disconnect lead wire plugs (20) and (18) from fuel gauge (21).
9.
Disconnect lead wire connector (14) from high beam indicator (15).
10.
Disconnect lead wire connectors (13) and (23) from two indicator panel lamps (8).
11.
Disconnect lead wire plug (22) from battery and generator gauge (24).
12.
Remove instrument cluster (2) from instrument panel (3).
0093 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version