|
|
TM 9-2320-361-24-1
0092 00
REAR WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
8.
Connect wire (19) to fuel sending unit (24).
9.
Connect plug (26) to fuel pump (25).
10.
Install ground wire (16) on support (17) with new lockwasher (15), screw (18), and new locknut (14).
11.
Remove slack from rear wiring harness (1) and install two clamps (20) on rear wiring harness (1)
and crossmember (22) with two screws (21) and new locknuts (23).
12.
Connect rear wiring harness (1) to front wiring harness (27).
13.
Connect battery ground cable (WP 0126 00).
14.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
18
17
16
1
21
15
19
20
14
22
23
26
24
25
27
1
END OF WORK PACKAGE
0092 00-7/8 blank
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |