 |
|||
|
|
|||
|
Page Title:
FRONT WIRING HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0091 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
2.
Connect front wiring harness (1) to rear wiring harness (15).
3.
Install front wiring harness (1) on brace (16) with two screws (13) and new locknuts (14).
4.
Connect wires (10) and (11) to stoplight switch (12).
5.
Remove slack from front wiring harness (1).
6.
Install two clamps (3) on front wiring harness (1), brace (4), and frame (9) with two screws (8) and
new locknuts (2).
7.
Install clamp (6) on front wiring harness (1) and U-bolt (7) with nut (5).
8.
Connect wire (19) to low air buzzer switch (20).
9.
Connect wires (38) and (39) to transfer switch (41) and lamp (40).
10.
Connect wire (22) to high beam indicator lamp (36).
11.
Connect wire (43) to panel lamp (44).
12.
Connect wire (21) to panel lamp (47).
13.
Connect wire (34) to wire (35).
14.
Connect wire (46) to coolant temperature gauge (45).
15.
Connect wire (18) to fuel gauge (17).
16.
Connect wire (37) to oil gauge (42).
17.
Connect plug (32) to starter switch (33).
18.
Connect wires (25) and (26) to preheater switch (27).
19.
Connect plug (23) to lamp selector switch (24).
20.
Install clamp (29) on steering column (28) and front wiring harness (1) with screw (31) and nut (30).
5
6
4
3
2
3
7
9
1
16
10
15
8
11
12
13
14
0091 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version