 |
|||
|
|
|||
|
Page Title:
STARTER MOTOR REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0088 00
STARTER MOTOR REPLACEMENT (Contd)
WARNING
Starter is heavy. Assistant must help during removal and
installation. Failure to do so may result in injury or death to
personnel.
REMOVAL
NOTE
Prior to removal, tag all lead wires for installation.
1.
Remove nut (6) and leads (5), (4), and (3) from positive solenoid stud (2).
2.
Remove nut (8) and lead (9) from starter motor stud (7).
3.
Remove three nuts (11), lockwashers (10), starter motor (1), gasket (12), adapter (13), and
gasket (14) from flywheel housing (15). Discard gaskets (12) and (14), and lockwashers (10).
INSTALLATION
1.
Install new gasket (14), adapter (13), new gasket (12), and starter motor (1) on flywheel
housing (15) with three new lockwashers (10) and nuts (11).
2.
Install lead (9) on starter motor stud (7) with nut (8).
3.
Install leads (3), (4), and (5) on positive solenoid stud (2) with nut (6).
4.
Install air cleaner assembly (WP 0053 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Lower and secure hood (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0088 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version