|
|
TM 9-2320-361-24-1
0080 00
WATER MANIFOLD AND HOSE REPLACEMENT (Contd)
REMOVAL
NOTE
There are two water manifolds and hoses. Both are removed
the same way.
1.
Loosen two clamps (7) on hose (8).
2.
Remove six screws (1) and lockwashers (2) from water manifold (3). Discard lockwashers (2).
3.
Remove water manifold (3), three gaskets (4), hose (8), and two clamps (7) from cylinder head (6)
and intake manifold (5). Discard gaskets (4).
INSTALLATION
NOTE
There are two water manifolds and hoses. Both are installed
the same way.
1.
Install hose (8) and two clamps (7) on water manifold (3). Do not tighten clamps (7).
2.
Install three new gaskets (4) and water manifold (3) on cylinder head (6) and intake manifold (5)
with six new lockwashers (2) and screws (1).
3.
Tighten two clamps (7) on hose (8).
4.
Install manifold heater (uncovered) (WP 0066 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Lower and secure hood (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
3
7
8
7
4
6
5
END OF WORK PACKAGE
0080 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |