 |
|||
|
|
|||
|
Page Title:
UPPER AND LOWER RADIATOR HOSE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0078 00
UPPER AND LOWER RADIATOR HOSE REPLACEMENT (Contd)
WARNING
Accidental or intentional introduction of liquid contaminants
into the environment is a violation of state, federal, and
military regulations. Refer to Army POL (WP 0001 00) for
information concerning storage, use, and disposal of these
liquids. Failure to do so may result in damage to environment
and health of personnel.
NOTE
Use a drain pan to capture any draining coolant. Dispose of
fluids in accordance with local policy and ordinances. Ensure all
spills are cleaned up.
UPPER HOSE REMOVAL
1.
Remove locknut (6) and screw (1) from rod (7) and bracket (8). Discard locknut (6).
2.
Loosen two clamps (2) on upper radiator hose (3).
3.
Tilt radiator (4) forward and remove upper radiator hose (3) and two clamps (2) from radiator (4)
and thermostat housing (5).
LOWER HOSE REMOVAL
1.
Loosen two clamps (9) on lower radiator hose (11).
2.
Remove lower radiator hose (11) and two clamps (9) from radiator (4) and water pump
housing (10).
UPPER HOSE INSTALLATION
1.
Install upper radiator hose (3) on thermostat housing (5) and radiator (4) with two clamps (2). Do
not tighten.
2.
Tilt radiator (4) backward and install screw (1) new locknut (6), and rod (7) on bracket (8).
3.
Tighten two clamps (2).
LOWER HOSE INSTALLATION
1.
Install lower radiator hose (11) on water pump housing (10) and radiator (4) with two clamps (9).
Tighten two clamps (9).
2.
Fill cooling system (WP 0076 00).
3.
Connect battery ground cable (WP 0126 00).
4.
Lower and secure hood (TM 9-2320-361-10).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0078 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version