 |
|||
|
|
|||
|
Page Title:
EXHAUST SYSTEM REPLACEMENT (M50A3) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0074 00
EXHAUST SYSTEM REPLACEMENT (M50A3) (Contd)
REMOVAL
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury to personnel will result.
1.
Remove locknut (15), screw (9), and coupling (16) from flex tube (17) and elbow (11). Discard
locknut (15).
2.
Remove locknut (24), screw (22), coupling (23), flex tube (17), and gaskets (10) and (25) from
elbow (11) and Y-pipe (31). Discard locknut (24) and gaskets (10) and (25).
3.
Loosen clamp (13) and remove elbow (11), clamp (13), and gasket (12) from turbocharger (14).
Discard gasket (12).
4.
Remove locknut (43), screw (2), and exhaust stack shutoff (1) from exhaust pipe (3). Discard
locknut (43).
5.
Remove locknut (4), screw (40), clamp (41), exhaust pipe (3), and gasket (42) from Y-pipe (31).
Discard locknut (4) and gasket (42).
6.
Remove four locknuts (6), screws (39), two clamps (5), and exhaust shield (38) from Y-pipe (31).
Discard locknuts (6).
7.
Remove two nuts (8), lockwashers (18), U-bolt (37), and clamp (19) from Y-pipe (31) and
bracket (7). Discard lockwashers (18).
8.
Remove two locknuts (32), washers (33), screws (36), washers (35), and cover plates (20) from
fender (34). Discard locknuts (32).
9.
Remove locknut (21), washer (26), screw (30), washer (29), clamp (28), and Y-pipe (31) from bracket
(27). Discard locknut (21).
0074 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version