 |
|||
|
|
|||
|
Page Title:
EXHAUST SYSTEM REPLACEMENT (ALL EXCEPT M50A3) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0073 00
EXHAUST SYSTEM REPLACEMENT (ALL EXCEPT M50A3) (Contd)
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury to personnel will result.
REMOVAL
1.
Remove locknut (13) and screw (7) from coupling (14). Discard locknut (13).
2.
Disconnect elbow (9) from flex tube (15), and remove coupling (14) and gasket (8) from elbow (9).
Discard gasket (8).
3.
Loosen clamp (11) and remove elbow (9), clamp (11), and gasket (10) from turbocharger (12).
Discard gasket (10).
4.
Remove locknut (22) and screw (21) from coupling (23), and remove flex tube (15), coupling (23),
and gasket (24) from exhaust pipe (29). Discard gasket (24) and locknut (22).
5.
Remove locknut (2) and screw (38) from coupling (39). Discard locknut (2).
6.
Remove stack pipe (1), coupling (39), and gasket (40) from exhaust pipe (29). Discard gasket (40).
7.
Remove four locknuts (4), screws (37), two clamps (3), and exhaust shield (36) from exhaust
pipe (29). Discard locknuts (4).
8.
Remove two locknuts (30), washers (31), screws (34), washers (33), and cover plates (18) from
fender (32). Discard locknuts (30).
9.
Remove two nuts (5), lockwashers (6), U-bolt (35), and clamp (17) from exhaust pipe (29) and
bracket (16). Discard lockwashers (6).
10.
Remove locknut (20), washer (19), screw (28), washer (27), and clamp (26) from exhaust pipe (29)
and bracket (25). Discard locknut (20).
11.
Remove exhaust pipe (29) from fender (32).
0073 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version