|
|
TM 9-2320-361-24-1
0072 00
HAND THROTTLE CONTROL CABLE MAINTENANCE (Contd)
REMOVAL
1.
Straighten end of control wire (4) and remove screw (1), connector (2), and control wire (4) from
accelerator rod flange (3).
NOTE
Assistant will help with step 2.
2.
Remove nut (7) from screw (6) and slide nut (7) off end of control cable (8).
3.
Pull control cable (8) up through hole in cab floor (5) and remove screw (6) from end of control
cable (8).
4.
Remove nut (12) and lockwasher (11) from control cable (8). Discard lockwasher (11).
5.
Pull hand throttle control (10) out from instrument panel (9).
1
2
3
4
0072 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |