|
|
TM 9-2320-361-24-1
0070 00
ACCELERATOR PEDAL, BRACKETS, AND ROD MAINTENANCE (Contd)
REMOVAL (Contd)
9.
Remove cotter pin (3) and connecting link (2) from accelerator pedal (4). Discard cotter pin (3).
10.
Remove pin (8) and accelerator pedal (4) from bracket (7).
NOTE
Assistant will help with step 11.
11.
Remove two locknuts (6), screws (1), and bracket (7) from cab floor (5). Discard locknuts (6).
12.
Remove two cotter pins (12), washer (9), spring (10), and swivel (11) from accelerator rod (13).
Discard cotter pins (12).
13.
Loosen nut (14) and remove ball joint (15) and nut (14) from accelerator rod (13).
INSTALLATION
1.
Install nut (14) and ball joint (15) on accelerator rod (13). Tighten nut (14).
2.
Install swivel (11), spring (10), and washer (9), on accelerator rod (13) with two new cotter pins (12).
NOTE
Assistant will help with step 3.
3.
Install bracket (7) on cab floor (5) with two screws (1) and new locknuts (6).
4.
Install accelerator pedal (4) on bracket (7) with pin (8).
5.
Install connecting link (2) on accelerator pedal (4) with new cotter pin (3).
2
1
3
8
4
7
5
6
0070 00-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |