|
|
TM 9-2320-361-24-1
0066 00
MANIFOLD HEATER (UNCOVERED) REPLACEMENT (Contd)
ELBOW INSTALLATION
1.
Install new gasket (24), elbow (25), and clamp (37) on air intake tube (23) and air intake
manifold (22) with four new lockwashers (34) and nuts (33).
2.
Tighten clamp (17) on air intake tube (23).
FUEL PUMP INSTALLATION
1.
Install fuel pump (14) on water outlet manifold (19) with two clamps (20), new lockwashers (8),
and screws (6).
2.
Install elbow (13) on fuel pump (14) and connect fuel inlet tube (10) to elbow (13).
FUEL FILTER INSTALLATION
1.
Install pipe coupling (15), elbow (16), and new fuel filter (18) on fuel pump (14).
2.
Connect fuel supply line (35) to fuel filter (18).
3.
Connect fuel return line (7) to tee (9).
4.
Connect wiring harness (21) to fuel pump (14).
5.
Connect wire (11) to wire (12).
IGNITION UNIT INSTALLATION
1.
Install ignition unit (4) on engine (40) with two clamps (36), new lockwashers (5), and screws (3).
2.
Connect cable assembly (38) to ignition unit (4).
3.
Connect wiring harness (39) to ignition unit (4).
4.
Install ground wire (41) on engine (40) with new lockwasher (2) and screw (1).
FUEL NOZZLE INSTALLATION
1.
Install two new filters (29) on fuel nozzle (27).
2.
Install fuel nozzle (27) and nut (26) on elbow (25).
3.
Install adapters (28) and (30) on fuel nozzle (27).
4.
Connect fuel inlet tube (10) and fuel return tube (7) to adapters (28) and (30).
5.
Install new gasket (31) and spark plug (32) on elbow (25).
6.
Connect cable assembly (38) to spark plug (32).
7.
Connect battery ground cable (WP 0126 00).
8.
Lower and secure hood (TM 9-2320-361-10).
9.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0066 00-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |