 |
|||
|
|
|||
|
Page Title:
MANIFOLD HEATER (COVERED) REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0065 00
MANIFOLD HEATER (COVERED) REPLACEMENT (Contd)
FUEL PUMP REMOVAL
1.
Remove fuel inlet tube (20) from elbow (1).
2.
Remove fuel supply tube (5) from elbow (4).
3.
Remove two clamps (3) and fuel pump (2) from bracket (10).
4.
Remove elbows (1) and (4) from fuel pump (2).
5.
Remove two screws (19), lockwashers (18), bracket (10), and four nuts (9) from air intake
manifold (8). Discard lockwashers (18).
6.
Remove fuel return tube (7) from tee (6).
ELBOW REMOVAL
1.
Loosen clamp (11) on air intake tube (12).
2.
Remove four nuts (15), lockwashers (16), clamp (14), elbow (13), and gasket (17) from air intake
manifold (8) and air intake tube (12). Discard lockwashers (16) and gasket (17).
FUEL FILTER REMOVAL
1.
Disconnect fuel supply tube (5) from adapter (21).
2.
Disconnect fuel supply tube (28) from fuel filter (29).
3.
Remove screw (27), lockwasher (26), clamp (25), fuel filter (29), and clamp (24) from side of
engine (23). Discard lockwasher (26) and fuel filter (29).
4.
Remove adapter (21) and elbow (22) from fuel filter (29).
FUEL FILTER INSTALLATION
1.
Install elbow (22) and adapter (21) on new fuel filter (29).
2.
Install fuel filter (29) on engine (23) with clamps (24) and (25), new lockwasher (26) and screw (27).
3.
Connect fuel supply tube (28) to fuel filter (29).
4.
Connect fuel supply tube (5) to adapter (21).
ELBOW INSTALLATION
1.
Install new gasket (17), elbow (13), and clamp (14) on air intake tube (12) and air intake
manifold (8) with four new lockwashers (16) and nuts (15).
2.
Tighten clamp (11) on air intake tube (12).
FUEL PUMP INSTALLATION
1.
Install fuel return tube (7) on tee (6).
2.
Install four nuts (9) on bracket (10) and install bracket (10) on air intake manifold (8) with two
screws (19) and new lockwashers (18).
3.
Install elbows (1) and (4) on fuel pump (2).
4.
Install fuel pump (2) on bracket (10) with two clamps (3).
5.
Connect fuel supply tube (5) to elbow (4).
6.
Connect fuel inlet tube (20) to elbow (1).
0065 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version