 |
|||
|
|
|||
|
Page Title:
MANIFOLD HEATER (COVERED) REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0065 00
MANIFOLD HEATER (COVERED) REPLACEMENT (Contd)
CAUTION
Cap or plug all openings immediately after disconnecting lines
and hoses to prevent contamination. Remove cap or plugs prior
to installation. Failure to do so may result in damage to
equipment.
COVER REMOVAL
Remove four screws (1), clamp (5), and fuel pump cover (2) from bracket (11).
IGNITION UNIT REMOVAL
1.
Remove screw (10), lockwasher (9), and wiring harness ground wire (8) from bracket (11). Discard
lockwasher (9).
2.
Disconnect wire (7) from wiring harness (6).
3.
Disconnect wiring harness (6) from ignition unit (4) and fuel pump (12).
4.
Disconnect cable assembly (23) from ignition unit (4) and spark plug (15).
5.
Remove two clamp assemblies (3) and ignition unit (4) from bracket (11).
FUEL NOZZLE REMOVAL
1.
Remove spark plug (15) and gasket (14) from elbow (13). Discard gasket (14).
2.
Disconnect fuel return tube (21) and fuel inlet tube (22) from adapters (20) and (16).
3.
Remove adapters (20) and (16) from fuel nozzle (19).
4.
Loosen nut (18) and remove fuel nozzle (19) and nut (18) from elbow (13).
5.
Remove two filter disks (17) from fuel nozzle (19). Discard filter disks (17).
0065 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version