 |
|||
|
|
|||
|
Page Title:
TURBOCHARGER OIL INLET TUBE AND ADAPTER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0055 00
TURBOCHARGER OIL INLET TUBE AND ADAPTER REPLACEMENT (Contd)
CAUTION
Cover or plug all hoses, connections, and openings immediately
after disconnecting or removing a component to prevent
contamination. Remove all plugs prior to component
installation.
REMOVAL
1.
Remove oil inlet tube (3) from elbow (5) and oil inlet adapter (8).
2.
Remove elbow (5) from engine (4).
3.
Remove two screws (1), lockwashers (2), oil inlet adapter (8), and gasket (7) from turbocharger (6)
Discard lockwashers (2) and gasket (7).
INSTALLATION
1.
Install new gasket (7) and oil inlet adapter (8) on turbocharger (6) with two new lockwashers (2)
and screws (1).
2.
Add 2 oz (59 ml) of new lubricating oil OE/HDO 30 into oil inlet adapter (8).
3.
Install elbow (5) on engine (4).
4.
Install oil inlet tube (3) on elbow (5) and oil inlet adapter (8).
5.
Connect battery ground cable (WP 0126 00).
6.
Lower and secure hood (TM 9-2320-361-10).
7.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0055 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version