|
|
TM 9-2320-361-24-1
0045 00
CRANKCASE BREATHER TUBE ADAPTER REPLACEMENT (Contd)
REMOVAL
1.
Loosen clamp (5) and disconnect hose (4) from crankcase breather tube adapter (3).
2.
Remove four locknuts (1), washers (2), and clamp (8) from crankcase breather tube adapter (3).
Discard locknuts (1).
3.
Remove crankcase breather tube adapter (3) and two gaskets (7) from two rocker arm covers (6).
Discard gaskets (7).
INSTALLATION
1.
Install two new gaskets (7) and crankcase breather tube adapter (3) on two rocker arm covers (6)
with clamp (8), four washers (2), and new locknuts (1). Tighten locknuts (1) 5560 lb-in.
(67 Nm).
2.
Connect hose (4) to adapter (3) and tighten clamp (5).
3.
Connect battery ground cable (WP 0126 00).
4.
Lower and secure hood (TM 9-2320-361-10).
5.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
1
2
3
8
7
6
5
4
END OF WORK PACKAGE
0045 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |