 |
|||
|
|
|||
|
Page Title:
ROCKER ARMS AND PUSHRODS MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0031 00
ROCKER ARMS AND PUSHRODS MAINTENANCE (Contd)
INSTALLATION
CAUTION
All rocker arm adjusting screws must be backed off flush with
rocker arm body before installation on cylinder head. Failure to
do so may bend pushrods and damage rocker arms.
1.
Position six pushrods (26) in channels (25) through cylinder head (24) and seat in six tappets (23).
2.
Position six rocker arms (27) on pushrods (26) and three supports (22) on cylinder head (24).
3.
Install three supports (22) on cylinder head (24) with six new lockwashers (28) and screws (21).
4.
Tighten six screws (21) 44 lb-ft (60 Nm).
5.
Connect battery ground cable (WP 0126 00).
21
28
22
27
26
~
25
24
23
0031 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version