|
|
TM 9-2320-361-24-1
0022 00
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INTRODUCTION (Contd)
GENERAL SERVICE AND INSPECTION PROCEDURES (Contd)
WARNING
Skysol 100 mixture is combustible; DO NOT use or store near
heat, sparks, flame, or other ignition sources. Use mechanical
ventilation whenever product is used in a confined space, heated
above ambient temperatures, or agitated. Keep container sealed
when not in use.
Contact with Skysol 100 may cause skin irritation. Use
chemical-resistant gloves. In case of skin contact, remove any
contaminated clothing and wash skin thoroughly with soap and
water. Wash contaminated clothing before reuse. Eye contact
may cause irritation, tearing, or blurring of vision. Use face
shield or goggles when eye contact may occur. In case of eye
contact, flush eyes with large amounts of water for at least 15
minutes or until irritation subsides. Inhalation may cause
irritation to upper respiratory passages. DO NOT have food or
drink in the vicinity. Failure to comply may result in injury to
personnel.
7.
Use Skysol 100 to clean grease or oil from metal parts. After the item is cleaned, rinsed, and dried,
apply a light grade of oil to unprotected surfaces to prevent rusting. Use soap and water to clean
rubber and plastic materials.
END OF WORK PACKAGE
0022 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |