SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--REPROGRAMMABLE (STE/ICE-R) TROUBLESHOOTING INTRODUCTION

TM 9-2320-361-24-1

0016 00

SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE--REPROGRAMMABLE

(STE/ICE-R) TROUBLESHOOTING INTRODUCTION (Contd)

The STE/ICE-R includes the following equipment:

The Vehicle Test Meter (VTM) is a tool for testing electrical and mechanical components.

Test Cards are attached to the front of the VTM to provide a quick but limited reference for the

mechanic. Test cards list test numbers, messages, and some test procedures.

The Transit Case is a portable, protective case that houses the STE/ICE-R equipment and all

necessary accessories. A pressure relief valve located on the front of the case allows the operator to

release any pressure or vacuum resulting from changes in climate during transit.

Cable assemblies are included for power supply and testing. Cables assemblies are referred to by a

name that describes how the cable is used. If necessary, two transducer cables (W4) can be joined

with the adapter supplied in the transducer kit to make one long cable. When cables are

connected, the large key on the cable connector mates with a keyway on the transducer connector

or VTM connector for proper installation. If a cable is suspected to be damaged, refer to

TM 9-4910-571-12&P for checking cable continuity.

The Test Probe Kit contains a variety of clips and probes, which can be attached to the test probe

cable W2. These clips and probes allow the user to take different types of measurements (e.g.,

cable continuity tests, battery tests) with greater ease.

The Transducer Kit (TK) is a covered tray inside the transit case that contains necessary

equipment to perform various electrical and diagnostic testing.

TM 9-4910-571-12&P describes the operation and organizational maintenance of the STE/ICE-R

system.

0016 00-2