 |
|||
|
|
|||
|
Page Title:
Table 1. Indicator, Gauges, and Warning System Troubleshooting - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-1
0014 00
INDICATORS, GAUGES, AND WARNING SYSTEM TROUBLESHOOTING (Contd)
Table 1. Indicator, Gauges, and Warning System Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test 3. Test in-tank fuel pump fuse.
6. IN-TANK FUEL PUMP
1. Turn power accessory switch
INOPERATIVE
to OFF position.
(Contd)
2. Remove fuse holder
3. With multimeter set to RX 1
1. If continuity is not found, replace
scale, check continuity of fuse.
fuse (WP 0059 00).
Attach negative lead to one
2. If continuity is present in fuse, go
side of fuse. Touch positive
to test 4.
lead to other side of fuse.
Test 4. Test fuel pressure delivered by
in-tank fuel pump with
engine stopped. Go to
WP 0006 00, Table 1,
malfunction 2, step 5.
Test 5. Test continuity of lead 654.
1. Disconnect negative battery
cable (WP 0126 00).
2. Disconnect lead 74 from start
switch and disconnect lead
654 from fuel pump.
3. Set multimeter to RX 1 scale.
4. Connect negative and positive
1. If continuity is not present, repair
or replace leads 74 and 654.
leads of multimeter between
2. If continuity is present, reconnect
lead 74 and lead 654.
leads 74 and 654 and recheck fuel
pump for proper operation.
0014 00-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version