 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME 10
Put shaft assembly (1) through opening in housing (2) until bearing (3) is seated
1.
against inside shoulder of housing.
2.
If oil seal (4) was taken out, press new seal into bearing cap (5). Be sure seal lip
faces toward housing side of cap.
Put shims (6) on bearing cap (5) as noted.
3.
4.
Put bearing cap (5) with oil seal (4) and shims (6) on housing (2). Put in four
capscrews (7) and washers (8).
Put sleeve (9) on shaft assembly (1) through oil seal (4) until it touches bearing (10).
5.
GO TO FRAME 11
18-259
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version