Disassembly - continued - TM-9-2320-209-34-2-30256

TM 9-2320-209-34-2-3

FRAME 15

CAUTION

When taking out shaft (1), use a ram smaller than diameter

of threads to protect threads and inner race of bearings

(2 and 3).

Hold gear end of shaft (1) to stop damage to gears (4 and 5) when bearings

(2 and 3) come out of housing (6).

Press gear end of shaft (1) until bearings (2 and 3) are free of housing (6).

Move shaft (1) to the left until teeth of gear (5) touch inside of housing (6).

While holding shaft (1) with one hand, press shaft free of bearing (2) and

gears (4 and 5).

Take out shaft (1) with bearing (3) and key (7) from housing (6).

Take out key (7) and take off bearing (3) from shaft (1).

Take out bearing (2) and gears (4 and 5) from housing (6).

END OF TASK

18-244