 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME 11
1.
Push pressure plate (1) toward housing (2) with one hand, while tightening
adjusting bolts (3) with the other hand.
2.
Tighten adjusting bolts (3) until stop pin (4) contacts the lug of brake
stop (5).
Tighten each adjusting bolt (3) until there is 1/32-inch clearance between
3.
pressure plate (1) and brake lining plate (6).
4.
Tighten lock nut (7) on each adjusting bolt (3).
GO TO FRAME 12
18-123
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version