 |
|||
|
|
|||
|
Page Title:
Inspection and Repair - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME
4
Check that machined surface on cover (1) and gearcase (2) where gasket (3) is placed
1.
has no nicks, burrs or old gasket material.
Check that machined surface on bearing cap (4) and gearcase (2) where gasket (5) is
2.
placed has no nicks, burrs or old gasket material.
Check that machined surface on brake housing (6) and gearcase (2) where gasket (7)
3.
is placed has no nicks, burrs or old gasket material.
4.
Check that machined surface on cover (8) and brake housing (6) where gasket (9) is
placed has no nicks, burrs or old gasket material.
Take off any old gasket material, and rub off any nicks or burrs with a honing stone.
5.
GO TO FRAME 5
18-50
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version