|
|
TM 9-2320-209-34-2-2
FRAME 4
Take out six screws (1), lockwashers (2), and four nuts (3).
1.
NOTE
Be careful not to lose drive clutch bearing shim set between
clutch case cap (4) and drive clutch bearing.
2.
Pry clutch case cap (4) from drive brake shell (5).
Take off and throw away gasket (6).
3.
Take off shims (7).
4.
GO TO FRAME 5
17-646
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |