|
|
TM 9-2320-209-34-2-2
Aline holes in rod ends (1) with holes in lever assemblies (2) and put in two
1.
clevis pins (3).
2.
Put two cotter pins (4) into clevis pins (3).
Put two operating handles (5) on lever assemblies (2).
3.
If taken off, put two plates (6) on operating handles (5). Put in two
4.
screws (7) and put on two nuts (8).
GO TO FRAME 3
17-640
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |