HORIZONTAL LEVELING WORM GEAR AND HOUSING ASSEMBLY REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M764) - continued

TM 9-2320-209-34-2-2

FRAME 3

Turn wormgear shaft (1) until worm wheel (2) meshes with wormgear in

wormgear assembly housing (3).

2. Facing end of worm gear assembly housing (3), check that worm gear in

wormgear assembly housing is centered over worm wheel (2). If wormgear is

not centered, take out two screws (4) and add or take off a shim (5) until

wormgear is centered. Put in two screws.

3. Check that ends of worm gear shaft (1) have no play in them. If ends of

shaft have play, set worm adjusting bearing. Refer to para 17-49g.

GO TO FRAME 4

17-606