|
|
TM 9-2320-209-34-2-2
FRAME 7
Put key (1) in shaft (2).
1.
2.
Aline keyway in sprocket (3) with key (1).
NOTE
Make sure that shaft (2) does not move when tapping on
sprocket (3).
3.
Using brass hammer, tap sprocket (3) until setscrew hole in sprocket is alined with
setscrew hole in shaft (2).
Tighten setscrew (4). Put on safety wire (5).
4.
END OF TASK
17-603
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |