 |
|||
|
|
|||
|
Page Title:
INTERMEDIATE CASE AND GEAR ASSEMBLY REMOVAL, REPAIR, REPLACEMENT AND ADJUSTMENT (TRUCK M764) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-34-2-2
Remove intermediate gear assembly. Refer to para 17-47a and 17-47b.
1.
2. Disassemble feed gear and hub assembly. Refer to para 17-47c.
3. If reading in step 4 of frame 3 is less than 0.006 inch, do the following:
a. Take 0.006 inch thickness from feed gear shim set (1).
b. Add 0.006 inch thickness to drive and feed gear shim set (2).
4. If reading in step 4 of frame 3 is more than 0.020 inch, do the following:
a. Add 0.014 inch thickness to feed gear shim set (1).
b. Take 0.014 inch thickness from drive and feed gear shim set (2).
5. Assemble intermediate gear assembly. Refer to para 17-47g.
6. Replace intermediate gear assembly. Refer to para 17-47h.
7. Do frame 1 again.
END OF TASK
17-557
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version