|
|
TM 9-2320-209-34-2-2
FRAME 16
NOTE
Be sure the thinnest plate (1) goes on the shortest
pin (2).
1.
Put four plates (1) on four pins (2) in plate retainer (3).
NOTE
Be sure the thinnest plate (1) is against rack bar (4)
teeth.
2.
Slide plate retainer (3) with four plates (1) over rack bar (4) and put in
place.
3.
Put on rack carrier nut (5).
4.
Put in two capscrews (6).
5.
Put back derrick tube base (see para 17-56e, Replacement, frame 1).
6.
Put back rack bar guide (see para 17-56e, Replacement, frame 2).
NOTE
Follow-on Maintenance Action Required:
1.
Replace lubricant. Refer to LO 9-2320-209-12/1.
2.
Replace integral derrick and snatch sheave assembly.
Refer to para 17-56.
Test boring machine. Refer to TM 9-2320-209-10.
3.
END OF TASK
17-529
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |