Cleaning, inspection, and repair. - TM-9-2320-209-34-2-10587

TM 9-2320-209-34-2-1

(2) Cleaning, inspection, and repair.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel and

damage to equipment.

1. Clean slave cylinder body (1) with dry cleaning solvent.

2. Check that all openings in slave cylinder body (1) have no dirt, dust or grime.

3. Check that piston bore (2) is not scored or scratched. If piston bore is scored

or scratched, polish it with crocus cloth. If scratches cannot be taken out, get

a new air hydraulic cylinder.

4. Check that finished surfaces on slave cylinder body (1) have no scratches. If

surfaces are scratched, rub out any scratches with honing stone. If scratches

cannot be rubbed out easily, get a new air hydraulic cylinder.

5. Check that threads in all threaded openings of slave cylinder body (1) are not

stripped or crossthreaded. Fix damaged threads with thread chaser. If

threads cannot be fixed, get a new air hydraulic cylinder.

END OF TASK

12-25