|
|
TM 9-2320-209-34-2-1
1.
Using hammer and brass drift pin, drive out through shaft (1) to rear of
carrier case (2).
2.
Take off rear bearing outer race (3).
3.
Place two channels (6) across bed of press (7).
Place two steel spacers (8) across channels (6).
4.
5.
Put adapter (9) from kit, pn 4231596, in place as shown.
Press bearing (4) and spacer (5) off through shaft (1).
6.
GO
TO FRAME 11
10-53
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |