Replacement - continued - TM-9-2320-209-34-2-10351

TM 9-2320-209-34-2-1

FRAME 2

Put wire into hole (1). Feed it through to other end and out left end of top

rail (2). Hook wire onto end of floodlight harness with three connectors (3).

2. Pull wire through side rail (4) until three connectors (3) are at hole (1).

Working through hole, take wire off end of floodlight harness.

3. Pull three connectors (3) through hole (1).

4. Put on four grommets (5).

5. Plug four connectors (6) into left and right floodlights.

6. Plug three connectors (7) into clearance lights.

NOTE

Follow-on Maintenance Action Required:

Replace cab protector: Refer to TM 9-2320-209-20.

END OF TASK

7-35