|
|
TM 9-2320-209-34-2-1
Unplug holes in three fuel injectors (1) and three holes in injector pump
1.
head (2).
2. Put three fuel injector tubes (3) in place. Put on three tube nuts (4) and
three tube nuts (5).
3. Tighten three tube nuts (5) to 23 to 25 pound-feet.
4. Slide three dust covers (6) into place.
5. Put four clamps (7) in place. Put in four capscrews and nuts (8).
6. Put outer clamp (9) in place. Put in two capscrews, flat washers, and
self-locking nuts (10).
NOTE
Follow-on Maintenance Action Required:
Fill cooling system. Refer to TM 9-2320-209-20.
1.
2. Close hood and side panels. Refer to
TM 9-2320-209-10.
END OF TASK
2-196
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |