|
|
TM 9-2320-209-20-3-4
FRAME 4
1.
Put rod (1) with clevis (2) in place under truck.
Using 3/4-inch wrench, loosen nut (3). Turn clevis (2) until holes aline with
2.
holes in lever (4). Tighten nut (3).
3. Put clevis pin (5) through holes in clevis (2) and lever (4).
4. Put cotter pin (6) through hole in clevis pin (5) and using pliers, bend open
ends of cotter pin.
END OF TASK
19-126
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |