|
|
TM 9-2320-209-20-3-4
FRAME 3
1.
Clamp lower end of sleeve (1) in vise (2).
2.
Slide socket (3) over strands and sleeve (1). Using adjustable wrench,
screw socket securely to sleeve. Socket will not screw all the way down.
3. Check inspection hole (4). Strands should be seen. If they are not seen,
using adjustable wrench, unscrew socket (3), straighten strands, and do
steps 1 and 2 again.
4. Take sleeve (1) out of vise (2).
GO TO FRAME 4
19-57
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |