|
|
TM 9-2320-209-20-3-3
FRAME 2
1.
Lift up other end of drive shaft (1). Aline hole in universal joint yoke (2)
with those in companion flange (3).
2.
Put two screws (4) through holes in universal joint yoke (2) and companion
flange (3).
3.
Screw on and hand tighten nuts (5) on screws (4).
4.
Using 3/4-inch open end wrench, hold screws (4).
Using 3/4-inch box
wrench, tighten nuts (5 and 6).
END OF TASK
18-440
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |