|
|
TM
9-2320-209-20-3-3
FRAME 2
NOTE
Cover (1) may need to be turned left or right before
lowering so that ends of yoke (2) clear pad eyes (4).
1.
Put on inner cover (1) so that end of yoke (2) with eyebolt (3) lines up
under upper pad eye (4).
2.
Place other end of yoke (2) in lower pad eye (4).
Push in pin (5).
Put in cotter pin (6).
Using pliers, bend open ends of
3.
cotter pin.
4.
Put end of eyebolt (3) in upper pad eye (4).
NOTE
Adjustment may be needed to push pin (7) through
holes in pad eye (4) and eyebolt (3). Turn eyebolt
nut (9) left or right as needed to line up holes.
Put in cotter pin (8). Using pliers, bend open ends of
5.
Put in pin (7).
cotter pin.
GO TO FRAME 3
18-349
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |