|
|
TM
9-2320-209-20-3-3
FRAME 2
1.
Put rear discharge lever (1) in forward (off) position.
2.
Using pliers, pull cable (2) through hole in bolt (3) until all slack is out
of cable.
CAUTION
Do not put any tension on cable (2) when tightening
nut (4).
3. Using 1/2-inch wrench, tighten nut (4).
NOTE
Follow-on Maintenance Action Required:
1. Lubricate tubes. Refer to LO 9-2320-209-12/1.
2. Refer to discharge valve replacement, para 18-53,
for replacement of bottom cover plate under
tank section of chassis.
END OF TASK
18-285
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |