|
|
TM
9-2320-209-20-3-3
FRAME 3
1.
Using pipe wrench, screw nipple (1) with larger valve (2) into larger fitting
on automatic dump valve housing (3). Tighten nipple (1) so that valve
handle is toward left side of truck.
2.
Using pipe wrench, screw nipple (4) with smaller valve (5) into smaller
fitting on automatic dump valve housing (3). Tighten nipple (4) so that
valve handle is toward left side of truck.
From underneath truck, push nipple (6) up into place through smaller hole
3.
in compartment floor (7).
Using pipe wrenches, hold valve (5) and screw in and tighten nipple (6).
4.
From underneath truck, push pipe (8) up into place through larger hole in
5.
compartment floor (7).
6.
Using pipe wrenches, hold valve (2) and screw in and tighten pipe (8).
Turn handles of valves (2 and 5) right to closed position.
7.
Close rear compartment doors.
8.
END OF TASK
18-196
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |