|
|
TM
9-2320-209-20-3-3
FRAME 3
1.
Put pipe (1) so pipe flange (2) lines up with flange (3).
2.
Put gasket (4) between pipe flange (2) and flange (3), lining up screw holes.
3.
Put lockwasher (5) on each of four screws (6). Using 3/4-inch wrench and
3/8-inch socket and ratchet, screw in and tighten four screws.
4.
Using screwdriver, tighten nut (7) on clamp (8).
5.
Close fuel truck rear compartment doors.
END OF TASK
18-186
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |