|
|
TM
9-2320-209-20-3-3
FRAME 4
1.
Working from rear of truck in tank compartment (1) and using pliers, put end
of cable (2) through special bolt (3).
2.
Using pliers, pull most of slack out of cable (2).
3.
Using 1/2-inch wrench, screw on and tighten nut (4) into place in lever (5).
NOTE
Follow-on Maintenance Action Required:
Lubricate tubes.
Refer to LO 9-2320-209-12/1.
END OF TASK
18-00
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |