 |
|||
|
|
|||
|
Page Title:
REAR SPRING SEAT REMOVAL AND REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-2
FRAME 2
1.
Coat inside of spring seat (1) with grease.
2.
Using lubricator bearing packer, pack bearings (2 and 3) with grease.
3.
Put inner bearing (2) on shaft (4).
4.
Put spring seat (1) on shaft (4).
5.
Put outer bearing (3) over shaft (4) and into spring seat (1).
6.
Screw on inner wheel bearing nut (5). Using torque wrench, tighten nut
to 60 to 75 pound-feet. Using 3-inch wheel bearing nut wrench, unscrew
nut 1/4 turn.
GO TO FRAME 3
17-42
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version