 |
|||
|
|
|||
|
Page Title:
FRONT LEAF SPRING ASSEMBLY REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-2
FRAME 2
WARNING
Clean hands carefully after using anti-seize compound.
It contains lead and even small amounts will cause
serious illness.
1.
Put a light coat of anti-seize compound on top of leaf spring (1) and eight
plates (2).
2.
Slide spring leaf (3) into spring leaf (1).
3.
Stack eight plates (2) in place on leaf spring (1), alining plates and holes.
Put center bolt (4) through holes as far as it will go.
4.
5.
Clamp C-clamp around leaf springs (1 and 3) and plates (2) two inches from
center bolt holes (5).
6.
Using C-clamp, tighten stack of leaf springs (1 and 3) and plates (2) until
nut (6) can be put on center bolt (4).
7.
Check alinement of all plates (2) and leaf springs (1 and 3).
8.
Using vise grip pliers, hold center bolt (4). Using 9/16-inch wrench,
tighten nut (6).
Unscrew C-clamp and take it off.
9.
GO
TO FRAME 3
17-22
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version