 |
|||
|
|
|||
|
Page Title:
TIRE AND TUBE REMOVAL AND REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM
9-2320-209-20-3-2
Put
end
(1)
of
retaining
ring
(2)
into
rim
groove
(3)
of
rim
(4).
Check
that
1.
the
end
is
caught
in
the
rim
groove.
2.
Using
locking
ring
tire
iron,
put
it
in
slot
(5)
in
retaining
ring
(2).
Pry
iron
toward
outside
of
rim
(4)
forcing
retaining
ring
into
rim
groove
(3).
Using
foot,
walk
retaining
ring
(2)
into
rim
groove
(3)
until
it
is
seated
fully
3.
all
the
way
around
rim
(4).
4.
Using mallet, hammer all the way around
on
retaining
ring
(2)
to
make
sure
that it is fully caught in rim groove (3).
WARNING
Be
careful
when
inflating
tire.
Remounted
tires
should
always be inflated in a safety cage. If a safety cage is
not available, turn tire and rim over with outer hub side
down.
Put
air
in
tire.
5.
Refer to TM 9-2320-209-10
and
TM
9-2610-200-20.
Screw
on
valve
cap
(6)
after inflating tire.
NOTE
Follow-on
Maintenance
Action
Required:
Replace
wheel
on
truck.
Refer
to
TM
9-2320-209-10.
END
OF
TASK
14-85/(14-86 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version